Concrete Blocks

concrete-blocks

The materials required for the production of the concrete blocks are aggregates, cement and water. They include crushed stones, gravel, volcanic cinders, foamed slag, furnace clinker, etc. The aggregates are selected by considering the weight, texture or composition of the unit designed. The strength, texture and economy of the concrete block depend upon the careful grading of the aggregate. The cement used is ordinary Portland cement. The water required is the normal potable water.

Manufacturing of concrete blocks

The processes involved in the manufacturing of the concrete blocks are as follows:

  1. Selection and proportion of Ingredients: The main criteria for the selection of the ingredients are the desired strength of the block. The greater the proportion of coarse aggregate, the greater will be the strength of the quantity of cement used.
  2. Mixing of ingredients: The blending of aggregates, cement and water should be done very carefully. The mixing should preferably take place in a mechanical mixer. For hand mixing, extreme care should be taken to see that the cement and aggregates are first mixed thoroughly in dry state and the water is then added gradually.
  3. Placing and vibration: The mixed concrete material is fed into the mould box upto the top level and it is ensured that the box is evenly filled. The vibration of concrete is done till it has uniformly settled in the mould box.
  4. Curing: The block is watered after about one day of casting and it is continued for a minimum of 7 days and preferably till 28 days. The longer the curing period, the better will be the block.

Cellular concrete blocks

This is a lightweight building material produced by autoclaving a set mix of a fine siliceous material such as fly-ash and binder in the form of lime. The cellular concrete blocks possess many technical advantages such as better strength to weight ratio, better sound insulation, stability of variations in temperatures and humidity, resistance to fire, low thermal conductivity, resistance to water seepage, etc.

As these blocks are machine finished and uniform in size, the units require comparatively less quantity of cement mortar and plaster can be completely avoided as the blocks are smooth and uniformly coloured.

Advantages of concrete blocks

The use of concrete blocks as a masonry unit can be observed on many construction sites because of the following advantages:

  1. It increases the carpet area of the building because of small width of concrete block as compared to the brick masonry wall.
  2. It provides better thermal insulation, enhanced fire resistance and sound absorption.
  3. It results in the saving of precious agricultural land which is used for manufacturing bricks.
  4. The blocks can be prepared in such a manner that the vertical joints can be staggered automatically and thus the skilled supervision is reduced.
  5. The construction of concrete block masonry is easier, faster and stronger than the brick masonry.
  6. The perfect shape and size of the concrete block makes the work of a mason much simpler.
  7. There is saving in construction of mortar because the numbers of joints are reduced.
  8. The utility can be further increased by producing reinforced concrete block (RCB) masonry units. The blocks are provided two holes for placing suitable reinforcing bars and the structure with RCB units could safely resist wind and earthquakes, if so designed. The traditional beams and columns can be completely eliminated and the structure with RCB units can be given a better appearance.

Uses of concrete blocks

In view of the advantages mentioned above, the concrete block masonry technique of construction can be adopted on a large scale of mass housing and various civil engineering projects.

Related Post

Share This Post

Related Articles

Leave a Reply

© 2017 ::Civil Engineering::. All rights reserved. Site Admin · Entries RSS · Comments RSS